tilebondplus
tilebondplus

BESTBUILD TILEBOND PLUS

Polymer Modified Cementitious Adhesives For Tiles And Stones

BESTBUILD TILEBOND PLUS is a white/grey, high polymer modified cementitious tile adhesive suitable for fixing vitrified tiles and natural stones of regular size on walls and floors. TILEBOND PLUS conforms to IS 15477:2004 Type 2.

Features
  • Slip resistant
  • Needs no curing
  • Good adhesion
  • Water resistant
  • Improves aesthetics
  • Saves time
Packaging

Available in 26 kg pack.

  • Walls & floors in interior and exterior areas, showers and swimming pools.
Property BESTBUILD Tilebond
Tensile Adhesion Strength
Dry Condition > 1200 N
Wet Condition > 700 N
Shear Adhesion Strength
Dry Condition @ 24 hours > 5 kN
Dry Condition @ 14 days > 11 kN
  • 1. Sufficiently flatten the substrate without undulations and clean thoroughly.
  • 2. Gradually add 3.5 parts of powder to 1 part of water (by volume) and mix it with a trowel until a lump free, workable paste is obtained. The total quality of water may be slightly adjusted to achieve the required consistency.
  • 3. After mixing allow the paste to stand for 2 minutes for it to mature.
  • 4. Apply the adhesive over the surface and comb with a notched side of the trowel to achieve a uniform thickness of 2 to 3mm.
  • 5. Place the tiles firmly on the adhesive bed with a twisting motion, ensuring good initial bonding and eliminating the possibility of any air voids.
  • 6. Joint grouting can commence after 24 hours with BESTBUILD JOINTFILL.
Bed Thickness 2 to 6 mm
Mixing Ratio (by volume) 3.5 (Powder):1 (Water)
Open Time 40 minutes (approx.)
Adjustability 45 minutes (approx.)
Pot Life 60 minutes (approx.)
Coverage Approximately 3 to 3.5 kg/sqm at 3 mm thickness when using a thin-bed trowel.
Shelf Life & Storage Shelf life is 12 months from the date of manufacturing, if stored in unopened, cool & dry place. Keep away from direct sunlight.
Property Sand & Cement BESTBUILD Tilebond Plus
Bonding Weak Strong
Tile fixing rate Slow Fast
Workability Poor Better
Bed thickness 15 to 40 mm, adds to weight 2 to 6 mm, reduces weight of the structure
Adhesion Will weaken over time Very durable
Background Weak to no bond in some surfaces Strong bond in all surfaces
Slippage High Non-slip
Variable materials Poor mixing control Easy to mix
download